Previous image Up to current index page (1) Next image The view down our driveway in the rearview mirror. Compare with next photo.. Same driveway, same position, but quite a startling view of things from the camera. This was before I aligned the MFD guide lines correctly. The original camera failed after three months, so I replaced it with a near identical one. Here is the inside of the failed one. The replacement is still going strong two years later. The back side of the PCB, featuring an ATMEL 328 processor ("Arduino"), and a 27Mhz crystal. The CCD side of the PCB. The lens, with square I/R filter.
Back to first image Up to first index page Skip to final image
Previous group of thumbnails Hide thumbnails
Reduce image size Enlarge image size
The original camera failed after three months, so I replaced it with a near identical one. Here is the inside of the failed one. The replacement is still going strong two years later.
The original camera failed after three months, so I replaced it with a near identical one. Here is the inside of the failed one. The replacement is still going strong two years later. (z0612242)
z0612242 (17/20): Canon-7D ISO3200 1/80 f9.0 Auto-WB 250mm (18-250mm) 2014-08-13 13:30
Use the magnify icons (above) to change the image size