Previous image Up to current index page (1) Next image Looks nice. White on white. The camera was mounted by drilling a 15/64" hole through the plastic at the "cut out" markings intended for the factory camera. The camera is mounted parallel with the face line of the cut-out, giving the best orientation for aligning the Subaru on-display guide lines. And the colour match is much better than it appears in this photo. The view down our driveway in the rearview mirror. Compare with next photo.. Same driveway, same position, but quite a startling view of things from the camera. This was before I aligned the MFD guide lines correctly. The original camera failed after three months, so I replaced it with a near identical one. Here is the inside of the failed one. The replacement is still going strong two years later.
Back to first image Up to first index page Skip to final image
Previous group of thumbnails Hide thumbnails Next group of thumbnails
Reduce image size Enlarge image size
The camera is mounted parallel with the face line of the cut-out, giving the best orientation for aligning the Subaru on-display guide lines. And the colour match is much better than it appears in this photo.
The camera is mounted parallel with the face line of the cut-out, giving the best orientation for aligning the Subaru on-display guide lines. And the colour match is much better than it appears in this photo. (z0612055)
z0612055 (14/20): Canon-7D ISO640 1/100 f5.6 Auto-WB 51mm (18-250mm) 2014-04-17 18:29
Use the magnify icons (above) to change the image size