Building a HomeBrew GPS for the Celestron Nexstar Telescope AUX bus

Previous image

Up to current index page (1)

Next image

Back to first image

Up to first index page

Skip to final image

Reduce image size

Show thumbnails

Now wire up the BN-180 to the Pro Micro, and also attach the resistor and the diode for the TXO line as shown. The black striped end of the diode goes closest to the TXO pin.

Now wire up the BN-180 to the Pro Micro, and also attach the resistor and the diode for the TXO line as shown. The black striped end of the diode goes closest to the TXO pin. (gps_wired)

gps_wired (4/10):

Use the magnify icons (above) to change the image size