Building a HomeBrew GPS for the Celestron Nexstar Telescope AUX bus

Previous image

Up to current index page (1)

Next image

Back to first image

Up to first index page

Skip to final image

Reduce image size

Enlarge image size

Show thumbnails

Here is the completed wiring, per the original diagram. All connections now made, including the _12V (red in this case) wire from the AUX cable to the diode on RAW.

Here is the completed wiring, per the original diagram. All connections now made, including the _12V (red in this case) wire from the AUX cable to the diode on RAW. (fully_wired)

Use the magnify icons (above) to change the image size