Previous image Up to current index page (2) Next image Back to first image Up to first index page Skip to final image Reduce image size Enlarge image size Show thumbnails
Apply a hot air gun to it, warming it evenly all around until it shrinks tight. Then, while it is still hot, squeeze the tubing flat around the cable, and also all around the RJ45 jack. The internal adhesive should stick in place as it cools. The "mode switch" may require cutting-out afterward. Oh, and be careful when heating around the switch -- it can melt!!
Apply a hot air gun to it, warming it evenly all around until it shrinks tight. Then, while it is still hot, squeeze the tubing flat around the cable, and also all around the RJ45 jack. The internal adhesive should stick in place as it cools. The mode switch may require cutting-out afterward. Oh, and be careful when heating around the switch -- it can melt!! (z040140334)
z040140334 (29/31): OnePlus-LE2125 ISO200 1/120 f1.9 6.064mm 2022-02-05 14:03
Use the magnify icons (above) to change the image size