Previous image Up to current index page (2) Next image Back to first image Up to first index page Skip to final image Reduce image size Enlarge image size Show thumbnails
Now, before applying the heat-shrink tubing, a little extra protection is needed in two places. Use tweezers to pull a small square of (ORANGE here) electrical tape underneath the solder connects at the buck converter. And similarly a second square between the buck and the exposed diode wire, to prevent short circuits in either location as things get squeezed together. The solder joints under the buck converter should be smooth with no point protrusions.
Now, before applying the heat-shrink tubing, a little extra protection is needed in two places. Use tweezers to pull a small square of (ORANGE here) electrical tape underneath the solder connects at the buck converter. And similarly a second square between the buck and the exposed diode wire, to prevent short circuits in either location as things get squeezed together. The solder joints under the buck converter should be smooth with no point protrusions. (z040135556)
z040135556 (27/31): OnePlus-LE2125 ISO200 1/120 f1.9 6.064mm 2022-02-05 13:55
Use the magnify icons (above) to change the image size