Previous image Up to current index page (1) Next image Back to first image Up to first index page Skip to final image Reduce image size Enlarge image size Show thumbnails
Bottom view, showing the INT and NC pads with no wires attached -- those don't get used in this project. Also notice how all of the protruding pointy bits have been snipped flush on everything on the underside. This way they won't stick through the heat-shrink tubing when it gets added in the final step (much later).
Bottom view, showing the INT and NC pads with no wires attached -- those don't get used in this project. Also notice how all of the protruding pointy bits have been snipped flush on everything on the underside. This way they won't stick through the heat-shrink tubing when it gets added in the final step (much later). (z040120845)
Use the magnify icons (above) to change the image size