Previous image Up to current index page (2) Next image Back to first image Up to first index page Skip to final image Reduce image size Enlarge image size Show thumbnails
Begin routing and soldering the five wires in place. Best to start with the RXI line, then the GND wire, followed by the wire to Pin-4 (the BUSY line). These all attach directly into the holes on the Arduino board, as shown.
Begin routing and soldering the five wires in place. Best to start with the RXI line, then the GND wire, followed by the wire to Pin-4 (the BUSY line). These all attach directly into the holes on the Arduino board, as shown. (z040112555)
z040112555 (24/31): OnePlus-LE2125 ISO100 1/211 f1.9 6.064mm 2022-02-05 11:25
Use the magnify icons (above) to change the image size