Previous image Up to current index page (1) Next image Back to first image Up to first index page Skip to final image Reduce image size Enlarge image size Show thumbnails
Solder the small "mode switch" to this side of the RJ45 jack. This step could be done even earlier if desired. Use flux, and try not to overheat it to the point where the switch innards melt! I run my soldering iron at 330C for most things.
Solder the small mode switch to this side of the RJ45 jack. This step could be done even earlier if desired. Use flux, and try not to overheat it to the point where the switch innards melt! I run my soldering iron at 330C for most things. (z040103320)
Use the magnify icons (above) to change the image size