Previous image Up to current index page (1) Next image Back to first image Up to first index page Skip to final image Reduce image size Show thumbnails
Begin the project assembly, by stacking three layers of 3M black mounting tape onto the ethernet module: one layer between the RJ45 jack and the W5500 chip, and then two more layers on top of that and the chip. This creates a flat surface onto which the Arduino board can be placed. But first, add a bit of electrical tape over top of the silver crystal as well, to prevent short circuits.
Begin the project assembly, by stacking three layers of 3M black mounting tape onto the ethernet module: one layer between the RJ45 jack and the W5500 chip, and then two more layers on top of that and the chip. This creates a flat surface onto which the Arduino board can be placed. But first, add a bit of electrical tape over top of the silver crystal as well, to prevent short circuits. (z040101708)
z040101708 (6/31): OnePlus-LE2125 ISO125 1/120 f2.2 3.5mm 2022-02-04 10:17
Use the magnify icons (above) to change the image size