Previous image Up to current index page (1) Next image Back to first image Up to first index page Skip to final image Reduce image size Enlarge image size Show thumbnails
Now to wire up the AUX port interface. Begin with the diode, stripe DOWN, into the TXO hole on the Arduino board. Then a 51K-ohm (give or take) resistor into the Vcc hole on the opposite edge of the Arduino board. Twist the resistor around the stiffer diode lead, and solder all three connections.
Now to wire up the AUX port interface. Begin with the diode, stripe DOWN, into the TXO hole on the Arduino board. Then a 51K-ohm (give or take) resistor into the Vcc hole on the opposite edge of the Arduino board. Twist the resistor around the stiffer diode lead, and solder all three connections. (z040080630)
z040080630 (18/30): OnePlus-LE2125 ISO100 1/310 f1.9 6.064mm 2022-02-05 08:06
Use the magnify icons (above) to change the image size