Previous image Up to current index page (1) Next image Back to first image Up to first index page Skip to final image Reduce image size Show thumbnails
Optional feature for use with Evolution mounts: Install a single pole switch between Arduino pin "5" and "GND".

When the switch is "on" (contact is closed), the Arduino will send a command to turn off the Evolution mount's built-in WiFi. This can be used to reduce battery consumption and "WiFi pollution". When the switch is "off", it turns the WiFi back on again.

If you like, the meaning of "on" and "off" on the switch can be reversed by editing one line of the Arduino program.
Optional feature for use with Evolution mounts: Install a single pole switch between Arduino pin 5 and GND.When the switch is on (contact is closed), the Arduino will send a command to turn off the Evolution mount's built-in WiFi. This can be used to reduce battery consumption and WiFi pollution. When the switch is off, it turns the WiFi back on again.If you like, the meaning of on and off on the switch can be reversed by editing one line of the Arduino program. (wifi_switch)
wifi_switch (17/22):
Use the magnify icons (above) to change the image size