Previous image Up to current index page (1) Next image Back to first image Up to first index page Skip to final image Reduce image size Enlarge image size Show thumbnails
My own assembled circuit. I added headers for the various cables, so that I could detach them as needed when photographing the board or making design changes. The white 6-pole header at the top is for the 6p6c cable from the telescope mount. The one at bottom right is for the GPSr, and the one at bottom left is where three of the switches connect. My DC-to-DC buck converter is different than the one pictured earlier, but works exactly the same. I have one extra paranoia diode between the converter and the 6-pin header -- again not really needed.

To continue, click on the right-pointing little blue arrow near the top left.
My own assembled circuit. I added headers for the various cables, so that I could detach them as needed when photographing the board or making design changes. The white 6-pole header at the top is for the 6p6c cable from the telescope mount. The one at bottom right is for the GPSr, and the one at bottom left is where three of the switches connect. My DC-to-DC buck converter is different than the one pictured earlier, but works exactly the same. I have one extra paranoia diode between the converter and the 6-pin header -- again not really needed.To continue, click on the right-pointing little blue arrow near the top left. (z040205253)
z040205253 (3/18): OnePlus-ONEPLUS A5000 ISO250 1/100 f1.7 4.103mm 2020-12-19 20:52
Use the magnify icons (above) to change the image size